Rainbow-electronics T89C51CC01 Manual do Utilizador descarregar pdf (Página 8)

T89C51CC01

Rev. D – 17-Dec-01

Figure 1. Port 1, Port 3 and Port 4 Structure

Note: The internal pull-up can be disabled on P1 when analog function is selected.

4.4 Port 0 and Port2 Ports 0 and 2 are used for general-purpose I/O or as the external address/data bus. Port

0, shown in Figure 3, differs from the other Ports in not having internal pull-ups. Figure 3

shows the structure of Port 2. An external source can pull a Port 2 pin low.

To use a pin for general-purpose output, set or clear the corresponding bit in the Px reg-

ister (x=0 or 2). To use a pin for general purpose input, set the bit in the Px register to

turn off the output driver FET.

Figure 2. Port 0 Structure

Notes: 1. Port 0 is precluded from use as general purpose I/O Ports when used as

address/data bus drivers.

2. Port 0 internal strong pull-ups assist the logic-one output for memory bus cycles only.

Except for these bus cycles, the pull-up FET is off, Port 0 outputs are open-drain.

QP1.X

LATCH

INTERNAL

WRITE

LATCH

READ

LATCH

P1.x

P3.X

P4.X

ALTERNATE

OUTPUT

FUNCTION

VCC

INTERNAL

PULL-UP (1)

ALTERNATE

INPUT

FUNCTION

P3.x

P4.x

BUS

P0.X

LATCH

INTERNAL

WRITE

LATCH

READ

LATCH

P0.x (1)

ADDRESS LOW/

DATA

CONTROL

VDD

BUS

(2)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 148 149

T89C51CC01 1

Comentários a estes Manuais

Sem comentários

Rainbow-electronics T89C51CC01 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Rainbow-electronics T89C51CC01