Rainbow-electronics NUC120 Manual do Utilizador Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 71
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 7
NUC120 Series DATA SHEET
Publication Release Date: May 31, 2010
- 8 - Revision V1.02
I
2
C
Two sets of I
2
C device.
Master/Slave up to 1Mbit/s
Bidirectional data transfer between masters and slaves
Multi-master bus (no central master).
Arbitration between simultaneously transmitting masters without corruption of serial data on
the bus
Serial clock synchronization allows devices with different bit rates to communicate vian one
serial bus.
Serial clock synchronization can be used as a handshake mechanism to suspend and resume
serial transfer.
Programmable clocks allow versatile rate control.
I2C-bus controllers support multiple address recognition ( two slave address with mask option)
I
2
S
Interface with external audio CODEC
Operate as either master or slave mode
Capable of handling 8, 16, and 32 bit word sizes
Mono and stereo audio data supported
I
2
S and MSB justified data format supported
Two 8 word FIFO data buffers are provided, one for transmit and one for receive
Generates interrupt requests when buffer levels cross a programmable boundary
Support two DMA requests, one for transmit and one for receive
USB 2.0 Full-Speed Device
One set of USB 2.0 FS Device 12Mbps
On-chip USB Transceiver.
Provide 1 interrupt source with 4 interrupt events.
Support Control, Bulk In/Out, Interrupt and Isochronous transfers.
Auto suspend function when no bus signaling for 3 ms.
Provide 6 programmable endpoints.
Include 512 Bytes internal SRAM as USB buffer.
Provide remote wakeup capability.
Support PDMA mode
ADC
12-bit SAR ADC with 800ksps
Up to 8-ch single-end mode or 4-ch differential mode
Single scan/single cycle scan/continuous scan
Each channel with individual result register
Scan on enabled channels
Threshold voltage detection
Conversion start by S/W, external pins
Support PDMA Mode
Analog Comparator
Two analog comparator modules
External input or internal bandgap voltage selectable at negative node
Interrupt when compare result change
Power down wake up
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 70 71

Comentários a estes Manuais

Sem comentários