Rainbow-electronics DS1859 Manual do Utilizador Página 12

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 28
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 11
DS1859
Dual, Temperature-Controlled Resistors with
Internally Calibrated Monitors
12 ____________________________________________________________________
above is accessible only through the Main Device
address. This memory is organized as three tables. The
desired table can be selected by the contents of mem-
ory location 7Fh, Main Device. The Auxiliary Device
address has no access to the tables, but the Auxiliary
Device address can be mapped into the Main Device’s
memory space as a fourth table. Device addresses are
programmable with two control bits in EEPROM.
ADEN configures memory access to respond to differ-
ent device addresses (see Tables 4 and 5).
The default device address for EEPROM-generated
addresses is A2h.
If the ADEN bit is 1, additional 128 bytes of EEPROM
are accessible through the Main Device, selected as
Table 00 (see Figure 3). In this configuration, the
Auxiliary Device is not accessible. APEN controls the
protection of Table 00 regardless of ADEN’s setting.
ADFIX (address fixed) determines whether the Main
Device address is determined by an EEPROM byte
(Table 01, byte 8Ch, when ADFIX = 1). There can be
up to 128 devices sharing a common 2-wire bus, with
each device having its own unique device address.
WPEN MPEN PROTECT MAIN
0X No
X0 No
1 1 Yes
Table 6. Main Device
APEN
WPEN PROTECT AUXILIARY
0
XNo
1
X Yes
Table 7. Auxiliary Device
MAIN
DEVICE
MON LOOK-UP
TABLE CONTROL
R0 LOOK-UP
TABLE
AUXILIARY
DEVICE
80h
DEC
0
95
96
127
128
143
199
255
EN
EN
EN
5Fh
60h
EN
SEL
EN
SEL
FFh
7Fh
80h
80h
C7h
F0h
FFh
RESERVED
8Fh
TABLE SELECT
TABLE 00
MAIN DEVICE ENABLE
DECODER
0
F0h
FFh
RESERVED
R1 LOOK-UP
TABLE
EN
SEL
80h
C7h
TABLE 03TABLE 02TABLE 01
MEMORY PARTITION WITH ADEN BIT = 1
Figure 3. Memory Organization, ADEN = 1
Vista de página 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentários a estes Manuais

Sem comentários