Rainbow-electronics MAX5259 Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Sensores Rainbow-electronics MAX5259. Rainbow Electronics MAX5259 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 20
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
General Description
The MAX5258/MAX5259 are +3V/+5V single-supply,
digital serial-input, voltage-output, 8-bit octal digital-to-
analog converters (DACs). Internal precision buffers
swing Rail-to-Rail
®
, and the reference input range
extends from ground to the positive supply. The +5V
(MAX5258) and the +3V (MAX5259) feature a 10µA
(max) shutdown mode.
The serial interface is double-buffered. A 16-bit input
shift register is followed by eight 8-bit input registers
and eight 8-bit DAC registers. The 16-bit serial word
consists of two “don’t care” bits, three address bits,
three control bits, and eight data bits. The input and
DAC registers can both be updated independently or
simultaneously with a single software command. The
asynchronous control input (LDAC) provides simultane-
ous updating of all eight DAC registers.
The interface is compatible with SPI™, QSPI™ (CPOL =
CPHA = 0 or CPOL = CPHA = 1), and MICROWIRE™.
A buffered digital data output allows daisy-chaining of
serial devices.
The MAX5258/MAX5259 are available in a 16-pin QSOP
package.
________________________Applications
Digital Gain and Offset Adjustment
Programmable Attenuators
Programmable Current Sources
Portable Instruments
Features
+2.7V to +5.5V Single-Supply Operation
Low Supply Current: 1.3mA
Low-Power Shutdown Mode
0.54mA (MAX5259)
0.80mA (MAX5258)
±1LSB DNL (max)
±1LSB INL (max)
Ground to V
DD
Reference Input Range
Output Buffer Amplifiers Swing Rail-to-Rail
10MHz Serial Interface, SPI, QSPI (CPOL = CPHA
= 0 or CPOL = CPHA = 1), and MICROWIRE-
Compatible
Double-Buffered Registers for Synchronous
Updating
Serial Data Output for Daisy-Chaining
Ultra-Small 16-Pin QSOP Package
+3V/+5V, Low-Power, 8-Bit Octal DACs
with Rail-to-Rail Output Buffers
________________________________________________________________ Maxim Integrated Products 1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
OUTB OUTC
OUTD
DOUT
DIN
CS
SCLK
OUTH
OUTG
TOP VIEW
MAX5258
MAX5259
QSOP
OUTA
OUTE
OUTF
GND
V
DD
REF
LDAC
Pin Configuration
19-1844; Rev 1; 4/01
Ordering Information
PART TEMP. RANGE PIN- PACK AGE
SU PPL Y
VO LT A G E
( V)
MAX5258EEE -40
o
C to +85
o
C 16 QSOP +5.0
MAX5259EEE -40
o
C to +85
o
C 16 QSOP +3.0
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
MAX5258/MAX5259
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Vista de página 0
1 2 3 4 5 6 ... 19 20

Resumo do Conteúdo

Página 1 - MAX5258/MAX5259

General DescriptionThe MAX5258/MAX5259 are +3V/+5V single-supply,digital serial-input, voltage-output, 8-bit octal digital-to-analog converters (DACs)

Página 2

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers10 ________________________________________________________________

Página 3

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 4

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers12 ________________________________________________________________

Página 5

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 6

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers14 ________________________________________________________________

Página 7

LDAC Operation (Hardware)LDAC is typically used in 4-wire interfaces (Figure 4).This command is level sensitive, and it allows asyn-chronous hardware

Página 8

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers16 ________________________________________________________________

Página 9

Power SequencingThe voltage applied to REF should not exceed VDDatany time. If proper power sequencing is not possible,connect an external Schottky di

Página 10

MAX5258/MAX5259Note: 1LSB = (VREF) ✕(28) = +VREF (1 / 256)____________________Chip Information TRANSISTOR COUNT: 13625PROCESS: BiCMOS+3V/+5V, Low-Powe

Página 11

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 12

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers2 _________________________________________________________________

Página 13

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DACwith Rail-to-Rail Output BuffersMaxim cannot assume responsibility for use of any circuitry other th

Página 14

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 15

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers4 _________________________________________________________________

Página 16

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 17

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers6 _________________________________________________________________

Página 18

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Página 19

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers8 _________________________________________________________________

Página 20

MAX5258/MAX5259+3V/+5V, Low-Power, 8-Bit Octal DAC with Rail-to-Rail Output Buffers___________________________________________________________________

Comentários a estes Manuais

Sem comentários