Rainbow-electronics MAX118 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Sensores Rainbow-electronics MAX118. Rainbow Electronics MAX118 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 12
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
_______________General Description
The MAX114/MAX118 are microprocessor-compatible,
8-bit, 4-channel and 8-channel analog-to-digital con-
verters (ADCs). They operate from a single +5V supply
and use a half-flash technique to achieve a 660ns con-
version time (1Msps). A power-down (PWRDN) pin
reduces current consumption typically to 1µA. The
devices return from power-down mode to normal oper-
ating mode in less than 200ns, allowing large supply-
current reductions in burst-mode applications (in burst
mode, the ADC wakes up from a low-power state at
specified intervals to sample the analog input signals).
Both converters include a track/hold, enabling the ADC
to digitize fast analog signals.
Microprocessor (µP) interfaces are simplified because the
ADC can appear as a memory location or I/O port without
external interface logic. The data outputs use latched,
three-state buffer circuitry for direct connection to an 8-bit
parallel µP data bus or system input port. The
MAX114/MAX118 input/reference configuration enables
ratiometric operation.
The 4-channel MAX114 is available in a 24-pin DIP or
SSOP. The 8-channel MAX118 is available in a 28-pin
DIP or SSOP. For +3V applications, refer to the
MAX113/MAX117 data sheet.
________________________Applications
High-Speed DSP Remote Data Acquisition
Portable Equipment Communications Systems
____________________________Features
Single +5V Supply Operation
4 (MAX114) or 8 (MAX118) Analog Input Channels
Low Power: 40mW (operating mode)
5µW (power-down mode)
Total Unadjusted Error 1LSB
Fast Conversion Time: 660ns per Channel
No External Clock Required
Internal Track/Hold
1MHz Full-Power Bandwidth
Internally Connected 8th Channel Monitors
Reference Voltage (MAX118)
MAX114/MAX118
+5V, 1Msps, 4 & 8-Channel,
8-Bit ADCs with 1µA Power-Down
________________________________________________________________
Maxim Integrated Products
1
4-BIT
DAC
4-BIT
FLASH
ADC
(4MSBs)
4-BIT
FLASH
ADC
(4LSBs)
TIMING AND
CONTROL
ADDRESS
LATCH 
DECODE
REF+
16
THREE-
STATE
OUTPUT
DRIVERS
D7
D6
D5
D4
D3
D2
D1
D0
MUX
*IN7
*IN8
Σ
REF+
*IN6
*IN5
IN4
IN3
IN2
IN1
A0
A1 A2 REF-
PWRDN
RD
MODE
INT
WR/RDY
CS
MAX114/MAX118
* MAX118 ONLY
_________________________________________________________Functional Diagram
19-1083; Rev 1; 8/96
PART
MAX114CNG
MAX114CAG
MAX114C/D 0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP. RANGE PIN-PACKAGE
24 Narrow Plastic DIP
24 SSOP
Dice*
______________Ordering Information
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
MAX114ENG
MAX114EAG
MAX114MRG -55°C to +125°C
-40°C to +85°C
-40°C to +85°C 24 Narrow Plastic DIP
24 SSOP
24 Narrow CERDIP**
Ordering Information continued on last page.
*Dice are specified at T
A
= +25°C, DC parameters only.
**Contact factory for availability.
Pin Configurations appear on last page.
Vista de página 0
1 2 3 4 5 6 ... 11 12

Resumo do Conteúdo

Página 1 - MAX114/MAX118

_______________General DescriptionThe MAX114/MAX118 are microprocessor-compatible,8-bit, 4-channel and 8-channel analog-to-digital con-verters (ADCs).

Página 2

MAX114/MAX118to break this current path during power-down. The FETshould have an on-resistance of less than 2Ω with a 5Vgate drive. When REF- is switc

Página 3

Transfer FunctionFigure 10 shows the MAX114/MAX118’s nominal trans-fer function. Code transitions occur halfway betweensuccessive-integer LSB values.

Página 4

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses arei

Página 5

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down2 __________________________________________________________________________

Página 6

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down____________________________________________________________________________

Página 7

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down4 __________________________________________________________________________

Página 8

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down____________________________________________________________________________

Página 9

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down6 __________________________________________________________________________

Página 10

MAX114/MAX118+5V, 1Msps, 4 & 8-Channel, 8-Bit ADCs with 1µA Power-Down____________________________________________________________________________

Página 11

MAX114/MAX118In read mode, WR/RDY is configured as a status output(RDY), so it can drive the ready or wait input of a µP.RDY is an open-collector outp

Página 12

Pipelined OperationBesides the two standard write-read-mode options,pipelined operation can be achieved by connectingWR to RD (Figure 6). With CS low,

Comentários a estes Manuais

Sem comentários