
MAX6505–MAX6508
Dual Trip SOT Temperature Switches
4 _______________________________________________________________________________________
Pin Description
PIN
MAX6505 MAX6506 MAX6507 MAX6508
NAME FUNCTION
1-— -— WARN
Open-Drain Active-Low Warning Output. WARN goes low
when the die temperature exceeds T
WARN
= T
ALARM
-
∆T
AW.
-— 1-— -— WARN
Push-Pull Active-High Warning Output. WARN goes high
when the die temperature exceeds T
WARN
= T
ALARM
-
∆T
AW.
2 2 2 2 GND Ground
3, 5 3, 5 -— -— S1, S0
Delta Temperature Select Input. Connect to V
CC
or GND to
select the difference between T
ALARM
and T
WARN
(Table
1 or see Electrical Characteristics).
-— -— 33S0
Hysteresis Select Input. Connect to V
CC
for 10°C
hysteresis. Connect to GND for 2°C hysteresis.
4444V
CC
Supply Voltage Input. Bypass V
CC
to GND with a 0.1µF
ceramic capacitor.
-— -— 5 5 N.C. No Connection. Not internally connected.
-— -— 6-—
OVER
Open-Drain Active-Low Overtemperature Output.
OVER
goes low when the die temperature exceeds the factory-
set value of T
OVER
.
-— -— _ 6 OVER
Push-Pull Active-High Overtemperature Output. OVER
goes high when the die temperature exceeds the factory-
set value of T
OVER.
-— -— 1-— OK
Open-Drain Active-High Temperature Sensor Output. OK
goes high impedance when the die temperature is
between the factory-set values of T
OVER
and T
UNDER
.
When the die temperature is above T
OVER
or below
T
UNDER
, OK goes low.
-— -— -—
1
OK
Push-Pull Active-Low Temperature Sensor Output. OK
goes low when the die temperature is between the factory-
set values of T
OVER
and T
UNDER
. When the die temp-
erature is above T
OVER
or below T
UNDER
, OK goes high.
6-— -— -— ALARM
Open-Drain Active-Low Alarm Output. ALARM goes low
when the die temperature exceeds the factory-set value of
T
ALARM
.
-— 6-— -— ALARM
Push-Pull Active-High Alarm Output. ALARM goes high
when the die temperature exceeds the factory-set value of
T
ALARM
.
Comentários a estes Manuais