MAX5156/MAX5157
Daisy Chaining Devices
Any number of MAX5156/MAX5157s can be daisy
chained by connecting the DOUT pin of one device to the
DIN pin of the following device in the chain (Figure 7).
Since the MAX5156/MAX5157’s DOUT has an internal
active pull-up, the DOUT sink/source capability deter-
mines the time required to discharge/charge a capaci-
tive load. Refer to the digital output V
OH
and V
OL
speci-
fications in the
Electrical Characteristics
.
Figure 8 shows an alternative method of connecting
several MAX5156/MAX5157s. In this configuration, the
data bus is common to all devices; data is not shifted
through a daisy-chain. More I/O lines are required in
this configuration because a dedicated chip-select
input (CS) is required for each IC.
Low-Power, Dual, 12-Bit Voltage-Output DACs
with Configurable Outputs
12 ______________________________________________________________________________________
Comentários a estes Manuais