Rainbow-electronics ATtiny2313 Manual do Utilizador descarregar pdf (Página 119)

119

ATtiny2313

2543A–AVR–08/03

The following simple USART initialization code examples show one assembly and one

C function that are equal in functionality. The examples assume asynchronous opera-

tion using polling (no interrupts enabled) and a fixed frame format. The baud rate is

given as a function parameter. For the assembly code, the baud rate parameter is

assumed to be stored in the r17:r16 Registers.

Note: 1. The example code assumes that the part specific header file is included.

For I/O Registers located in extended I/O map, “IN”, “OUT”, “SBIS”, “SBIC”, “CBI”,

and “SBI” instructions must be replaced with instructions that allow access to

extended I/O. Typically “LDS” and “STS” combined with “SBRS”, “SBRC”, “SBR”, and

“CBR”.

More advanced initialization routines can be made that include frame format as parame-

ters, disable interrupts and so on. However, many applications use a fixed setting of the

baud and control registers, and for these types of applications the initialization code can

be placed directly in the main routine, or be combined with initialization code for other

I/O modules.

Assembly Code Example

(1)

USART_Init:

; Set baud rate

out UBRRH, r17

out UBRRL, r16

; Enable receiver and transmitter

ldi r16, (1<<RXEN)|(1<<TXEN)

out UCSRB,r16

; Set frame format: 8data, 2stop bit

ldi r16, (1<<USBS)|(3<<UCSZ0)

out UCSRC,r16

ret

C Code Example

(1)

void USART_Init( unsigned int baud )

{

/* Set baud rate */

UBRRH = (unsigned char)(baud>>8);

UBRRL = (unsigned char)baud;

/* Enable receiver and transmitter */

UCSRB = (1<<RXEN)|(1<<TXEN);

/* Set frame format: 8data, 2stop bit */

UCSRC = (1<<USBS)|(3<<UCSZ0);

}

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 210 211

Comentários a estes Manuais

Sem comentários

Rainbow-electronics ATtiny2313 Manual do Utilizador Página 119

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Rainbow-electronics ATtiny2313