Rainbow-electronics DS1804 Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Hardware de computador Rainbow-electronics DS1804. Rainbow Electronics DS1804 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 7
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
1 of 7 102699
FEATURES
Single 100-position taper potentiometer
Nonvolatile “on-demand” wiper storage
Operates from 3V or 5V supplies
Up/down, increment-controlled interface
Available in 8-pin (300-mil) DIP, 8-pin
(150-mil) SOIC, 8-pin (118-mil) µSOP, and
Flip Chip packages
Operating Temperature:
Industrial: -40ºC to +85ºC
Standard Resistance Values:
DS1804-010 10 k
DS1804-050 50 k
DS1804-100 100 k
PIN ASSIGNMENT
PIN DESCIPTION
H - High-Terminal of Potentiometer
L - Low-Terminal of Potentiometer
W - Wiper of Potentiometer
V
CC
- 3V or 5V Power Supply
CS - Chip Select
U/ D - Up/Down Control
INC - Increment/Decrement Wiper Control
GND - Ground
DESCRIPTION
The DS1804 NV Trimmer Potentiometer is a nonvolatile digital potentiometer having 100 positions. The
device provides an ideal method for low-cost trimming applications using a CPU or manual control input
with minimal external circuitry. Wiper position of the DS1804 can be stored in EEPROM memory on
demand. The device’s wiper position is manipulated by a 3-terminal port that provides an increment/
decrement counter controlled interface. This port consists of the control inputs CS , INC , and U/ D . The
DS1804 is available in three resistor grades, which include a 10 k, 50 k, and 100 k. The device is
provided in an industrial temperature grade. Additionally, the DS1804 will operate from 3V or 5V
supplies and is ideal for portable application requirements. Three packaging options are available and
include the 8-pin (300-mil) DIP, 8-pin (150-mil) SOIC, 8-pin (118-mil) uSOP, and the Flip Chip
Package.
DS1804
NV Trimmer Potentiomete
r
www.dalsemi.com
INC 1 8 V
CC
U/D 2 7 CS
H 3 6 L
GND 4 5 W
8-Pin DIP (300-mil)
8-Pin SOIC (150-mil)
8-Pin uSOP (118-mil)
8-Pin Flip Chip Package
See Mech. Drawings Section
Vista de página 0
1 2 3 4 5 6 7

Resumo do Conteúdo

Página 1 - NV Trimmer Potentiomete

1 of 7 102699FEATURES Single 100-position taper potentiometer Nonvolatile “on-demand” wiper storage Operates from 3V or 5V supplies Up/down, incr

Página 2 - PIN DESCRIPTIONS

DS18042 of 7 102699OPERATIONThe DS1804 is a single nonvolatile potentiometer. The device has a total of 100 tap-points including theL- and H- terminal

Página 3 - NONVOLATILE WIPER STORAGE

DS18043 of 7 102699DS1804 BLOCK DIAGRAM Figure 1POWER-UP/POWER-DOWN CONDITIONSOn power-up the DS1804 will load the value of EEPROM memory into the wip

Página 4 - =2.7V to 5.5V)

DS18044 of 7 102699ABSOLUTE MAXIMUM RATINGS*Voltage on Any Pin Relative to Ground -1.0V to +7.0VOperating Temperature -40°C to +85°CStorage Temperatur

Página 5 - D to INC Setup

DS18045 of 7 102699ANALOG RESISTOR CHARACTERISTICS (-40°C to +85°C;VCC=2.7V to 5.5V)PARAMETER SYMBOL MIN TYP MAX UNITS NOTESEnd-to-End Resistor Tolera

Página 6 - CS , INC , U/ D =

DS18046 of 7 102699NOTES:1. All voltages are referenced to ground.2. Valid for VCC = 5V only.3. Resistor input voltages cannot go below ground or exce

Página 7 - DS1804 ORDERING INFORMATION

DS18047 of 7 102699DS1804 ORDERING INFORMATIONORDERINGNUMBERPACKAGEOPERATINGTEMPERATUREVERSIONDS1804-010 8L DIP (300-MIL) -40°C TO +85°C10kΩDS1804-050

Comentários a estes Manuais

Sem comentários